Let's talk about cardboard Christmas houses and accessories

Visit our Contributors' Pages:
Visit Family Christmas Online Visit Howard Lamey's own web page, LittleGlitterHouses.com Click to Sign Up for Maria Cudequest's Collectibles Blog
Visit Family Christmas Online Click to visit Papa Ted's Place - the ultimate cardboard Christmas house resource. Click to return to the Old Christmas Tree Lights Table of Contents Page



Note: To ask a question, sign up for our "Christmas Times" newsletter, or learn how
to apply for membership to this forum, please visit our Contact page.


Note: All content on this forum is Copyright (c) 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 by Paul D. Race
and by the posters who have contributed specific content. All material is for your personal use only. No content
or plans may be republished or sold, nor may any plans be used to make products to sell without prior written
permission from Paul D. Race and the individual who contributed the content or plan in question.
For permissions or questions about this policy, please contact us using our Contact page.
It is currently Thu Mar 28, 2024 11:18 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Mon Aug 04, 2014 12:44 pm 
Offline

Joined: Mon Sep 19, 2011 6:51 pm
Posts: 706
Hello:

I am looking into making my own low voltage LED lighting system for my houses.

I figure some of the collectors out there would know this answer.

Across the years they were made, how many size light bulb hole sizes were there.

Could I make one size to set into a house or would it have to fit several sizes.

Thanks for any info.

Steve


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 04, 2014 8:38 pm 
Offline
User avatar

Joined: Sat Sep 10, 2011 6:46 pm
Posts: 2249
Steve...

I've wondered the same thing...how many different light holes were there?...I hope some of the "major collectors" will chime in...

Please share your LED lighting project with us...

My very best regards...Howard...

_________________
View my Little Glitter House Photo Album
https://photos.google.com/share/AF1QipOODm--XeeYEyxSdc4RY4DdTpQBRuRSWuipFHFP7-QWtidYW9c6Az-qbcAAQXLsBw?key=YlNqQjVkbWRLcjlSS3F6dHZQa3RhN0x5Mm9MTFd3


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 05, 2014 7:16 am 
Offline
Site Admin
User avatar

Joined: Fri Sep 02, 2011 4:27 pm
Posts: 1678
As I understand it:

When the houses started getting holes in the back, most were sold in sets of 8 because that's the way the C-6 series cone-shaped bulbs were usually sold by the late 1920s. The base socket size was 3/8" so the hole would have been a little larger to accommodate the outside of the socket. (5/8" or so?)

When C-7 parallel bulbs took over in the 1960s their base socket size was 15/32". So it's possible that the last generation of putz houses had a larger hole (9/16" or so?). Much later, Dept. 56 settled on individual C-7 bulbs to light their houses. All currently made ceramic, resin and cardboard houses have holes large enough to accommodate C-7s.

So it seems to me that those are the only two sizes to worry about. C-6 if you're trying to make an "authentic" copy of an early house and you'll be lighting it with C-6s or leds or mini lights anyway. C-7 if you're making it for other people who might want to stick one of the Dept. 56 lights in the back.

Sorry, I don't have precise measurements of the holes because all my houses are in the attic at present.


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 05, 2014 7:35 am 
Offline

Joined: Mon Sep 19, 2011 6:51 pm
Posts: 706
Interesting.

My plan is to have a plastic plug that will insert into the light bulb hole.

So I need pretty accurate measurements.

Maybe when people start pulling out their collections, I'll be able to get some
to measure them for me.

Thanks for the info.

Steve


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 05, 2014 11:46 am 
Offline
Site Admin
User avatar

Joined: Fri Sep 02, 2011 4:27 pm
Posts: 1678
Steve, it occurred to me after I sent my previous e-mail that C-7 bulbs are significantly wider than their sockets. (C-7 bulbs weren't THAT much wider). Phillips lists their nightlight bulbs (the same kind most people use in Dept 56 houses) as .875 in diameter. Since that's what people are using today, I think you're looking at a .9" hole. The older houses would have had smaller holes, but very few people are using serial strands to light them these days.

Hope this helps.

Paul


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 05, 2014 8:46 pm 
Offline

Joined: Tue Sep 20, 2011 5:35 pm
Posts: 1093
Hi Steve,

I use led lights 20 on a string, they stay cool but I'm sure they do not offer the same amount of light as the C6 or C7 bulbs do. I put multiple bulbs in each house to provide more light and I really like the white cords I can tuck them under the batting and bring them up small holes I make just behind the back of the house. I also like the fact you can take off any light bulb so there in no light shinning through the batting when I sting them over to the next house. I do have to replace the batteries every 10 days or so but it works well because I don't have an electrical plug near by. I purchased my lights from eLight bulbs http://www.elightbulbs.com/?source=Micr ... LightBulbs item number HS17599.

As far as the holes I have used all different sizes. For most of my own design I cut a 3/4 of an inch hole, this is must so I can fit multiple light bulbs and the wires in the house. For the reproductions houses I use the same dimensions as the original house some have been over an inch.

I hope this help, I am looking forward to hearing more about lighting our houses!


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 05, 2014 9:37 pm 
Offline

Joined: Mon Sep 19, 2011 6:51 pm
Posts: 706
Thanks for all the info so far.

I have been using some high output LEDs at work.

Great thing is they product little heat.

My vision is to have a distribution box with multi points to plug in each house.

I'm location some small plastic round hole plugs to mount the led to.

You could then push it into the hole.

The reason for the hole size is so I can have a good fit.

I figure across the years and brand there maybe a few different sizes of holes.

steve


Top
 Profile  
Reply with quote  
PostPosted: Wed Aug 06, 2014 8:21 am 
Offline

Joined: Sun Jan 22, 2012 8:30 pm
Posts: 231
HI Steve,

Have you considered Pete Oehmen's collectors guide? It contains photos and precise measurements of every aspect of almost every kind of house, including the light hole dimensions.

If you were to contact him, I'm sure he'd share that info with you.

Barb


Top
 Profile  
Reply with quote  
PostPosted: Wed Aug 06, 2014 12:26 pm 
Offline

Joined: Tue Sep 20, 2011 5:35 pm
Posts: 1093
Good info Barb that's what I use!


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron




Click to see sturdy Lionel(r) trains that are perfect for your Christmas tree.



Note: To ask a question, sign up for our "Christmas Times" newsletter, or learn how
to apply for membership to this forum, please visit our Contact page.


Note: All content on this forum is Copyright (c) 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 by Paul D. Race
and by the posters who have contributed specific content. All material is for your personal use only. No content
or plans may be republished or sold, nor may any plans be used to make products to sell without prior written
permission from Paul D. Race and the individual who contributed the content or plan in question.
For permissions or for questions about this policy, please contact us using our Contact page.



Visit our affiliated sites:
- Christmas Memories and Collectibles -
Visit the FamilyChristmasOnline site. Visit Howard Lamey's glitterhouse gallery, with free project plans, graphics, and instructions. Visit Papa Ted Althof's extensive history and collection of putz houses, the largest and most complete such resource on the Internet.. Click to return to the Old Christmas Tree Lights Table of Contents Page Click to sign up for Maria Cudequest's craft and collectibles blog.
Click to visit Fred's Noel-Kat store.
- Family Activities and Crafts -
Click to see reviews of our favorite family-friendly Christmas movies. Free, Family-Friendly Christmas Stories Decorate your tree the old-fashioned way with these kid-friendly projects. Free plans and instructions for starting a hobby building vintage-style cardboard Christmas houses. Click to find free, family-friendly Christmas poems and - in some cases - their stories. Traditional Home-Made Ornaments
- Trains and Hobbies -
Visit Lionel Trains. Free building projects for your vintage railroad or Christmas village. Click to see Thomas Kinkaded-inspired Holiday Trains and Villages. Big Christmas Train Primer: Choosing and using model trains with holiday themes Building temporary and permanent railroads with big model trains Click to see HO scale trains with your favorite team's colors.
- Music -
Carols of many countries, including music, lyrics, and the story behind the songs Wax recordings from the early 1900s, mostly collected by George Nelson.  Download them all for a 'period' album.
Best-loved railroad songs and the stories behind them.
Heartland-inspired music, history, and acoustic instrument tips. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable. Own a guitar, banjo, or mandolin?  Want to play an instrument?  Tips to save you money and time, and keep your instrument playable.



Click to trains that commemorate your team!

Powered by phpBB® Forum Software © phpBB Group