Greetings to all...
This project was inspired by old, lithographed tinplate toy log cabins I saw on the internet…but instead of graphics for shingles, the roof is covered with cotton batting with just a little glitter…
Here’s a picture of the completed "loggie" and the graphics for the walls and chimney…patterns for the cardboard body and chimney will be posted immediately below in the next reply...
I suggest you size as required and print out the graphics before using the pattern for the body and chimney to cut out and assemble…I discovered the hard way that the output of printers varies so you may have to adjust the dimensions of the loggie walls to fit the graphics…the goal is to get the walls to fold at the corners, so the log pattern alternates more or less like a real log cabin…
Wishing you all a Happy Thanksgiving...
Howard...
| Attachments: |
|
loggie printie ccf.jpg [ 206.01 KiB | Viewed 4785 times ] |
|
Scan_20221123 (3).jpg [ 286.46 KiB | Viewed 4785 times ] |
|
Scan_20221123 (4).jpg [ 340.82 KiB | Viewed 4785 times ] |