https://cardboardchristmas.com/forums/

2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION
https://cardboardchristmas.com/forums/viewtopic.php?f=10&t=2131
Page 1 of 2

Author:  Howard [ Tue Jun 14, 2022 9:26 am ]
Post subject:  2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

Greetings to all...

A timber frame "Dolly" inspired house has always been on my project list...it's a small version of the vintage original...the base is 4" x 5"...overall height is 4 1/2"...I would have already published the patterns, graphics for the walls, windows, roof and chimney plus a picture of the finished house if my life had not been rudely interrupted by a strain of COVID...hopefully i'll get the project finished soon...

Here is a picture of my prototype in raw cardboard with black and white graphic plus images of pieces in the works...stay tuned for updates...

My very best regards...

Howard...

Attachments:
IMG_9945.JPG
IMG_9945.JPG [ 227.65 KiB | Viewed 6585 times ]
IMG_9927.jpg
IMG_9927.jpg [ 74.94 KiB | Viewed 6585 times ]
IMG_9942.JPG
IMG_9942.JPG [ 40.37 KiB | Viewed 6585 times ]

Author:  Howard [ Tue Jun 14, 2022 2:30 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

UPDATE...TIMBER FRAME HOUSE...PROJECT 11 FOR 2022...

Here's a picture of the vintage inspiration house...my version will have a red body and chimney...the roof will be a green shingle look with some mica flake snow...I copied the open gate detail from another Dolly House...

About the base in the original topic picture above...it's a piece of foam a little less than 5/8" with a layer of poster board laminated on the top and bottom..

stay tuned...

Howard...

Attachments:
IMG_9825.PNG
IMG_9825.PNG [ 351.84 KiB | Viewed 6570 times ]

Author:  Howard [ Thu Jun 16, 2022 5:01 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

UPDATE...6/16/2022...TIMBER FRAME HOUSE...PROJECT 11 FOR 2022...

Making progress on covering the thin cardboard body with the printed graphics wrap...I'll be posting the PDFs for the graphic wrap plus patterns soon...stay tuned...

Howard...

Attachments:
File comment: thin cardboard body and printed graphics cut out and ready attaching to the body with glue...the openings for the light hole, door and windows and chimney will be cut after the glue dries...
IMG_9980.jpg
IMG_9980.jpg [ 137.15 KiB | Viewed 6515 times ]

Author:  Howard [ Sat Jun 18, 2022 12:21 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

UPDATE...6/18/2022...TIMBER FRAME HOUSE...PROJECT 11 FOR 2022...

Below are the PDFs for the house and roof graphics plus patterns and details for other parts...I'm nearing completion of the build...stay tuned...

My very best regards...

Howard...

Attachments:
reproduction dolly style house shingle roof graphics.pdf [493.08 KiB]
Downloaded 325 times
reproduction dolly timber frame house graphics.pdf [571.54 KiB]
Downloaded 308 times
reproduction dolly style timber frame house pattern sheet.pdf [408.87 KiB]
Downloaded 297 times

Author:  Howard [ Sun Jun 19, 2022 1:11 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

UPDATE...6/19/2022...TIMBER FRAME HOUSE...PROJECT 11 FOR 2022...

Greetings to all...

This project is finished...I'll let the picture tell the story...

Now, I'm in the hunt for another little house project...or a flattie figurine or two...

Howard...

Attachments:
IMG_9986.JPG
IMG_9986.JPG [ 194.01 KiB | Viewed 6421 times ]

Author:  maria [ Sun Jun 19, 2022 5:33 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

This looks amazing!

Author:  Clinton [ Mon Jun 20, 2022 6:29 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

Really nice Howard! How did you make that printed pattern? Was the design done on your PC, or hand colored then printed? Amazing work!

Regards,

Clinton

Author:  Howard [ Mon Jun 20, 2022 9:21 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

Clinton...

How?...strictly "old school" (for the most part)... :shock:

I scaled and drew it out with a ruler, pencil and circle templates...then transferred the drawing to the back side of red scrapbook paper, cut out the areas did't want, glued it down (good side up with no pencil lines showing) on white paper and had laser copied...the exposed bricks were cut from adhesive back address labels with cuticle scissors...

I did scan the cut out pieces and patterns so I could post the graphics and patterns as PDFs on the forum...Microsoft Paint was used to draw the roof shingle patterns, then copied and pasted to make an image that is larger than the cardboard roof...

It works for me... :D

Howard...

Author:  Howard [ Mon Jun 20, 2022 9:52 pm ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

Clinton…

Forgot to mention…the shutters are also pieces of adhesive back labels…the tree shapes on the shutters were drawn with a red ball point pen…

Howard…

Author:  Clinton [ Thu Jun 23, 2022 5:17 am ]
Post subject:  Re: 2022 PROJECT 11 -- TIMBER FRAME DOLLY STYLE REPRODUCTION

Howard--

Sometimes, "Old School" is the BEST way to do it my friend! :lol: I really want to give this a try myself now! Thanks kindly for your how-to on this project. I have tried to figure these Dolly Printies for a while and this by far is the most authentic way I have ever seen it done. It takes a Master like yourself to do it..
. ;)

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://phpbb.com/